Guitar V2 Information
All of the PocketRockit V2 questions and comments go here.
This entry was posted
on Saturday, February 27th, 2010 at 12:55 am and is filed under Guitar PR9017 V2.
You can follow any responses to this entry through the RSS 2.0 feed.
You can skip to the end and leave a response. Pinging is currently not allowed.
I can’t put the battery cover on when there is a battery in the V1, Followed directions, but still can’t do it. Probably something simple, but I can’t figure it out. Any help would be good.
Some batteries are larger than others and can be a pain to fit into the V1.
The trick is to hook the two front tabs of the battery door in first. Then rotate the battery door down while pulling back slightly. The door should snap right in.
I’m not sure why this is in the V2 section, but as you’ve already started…
I bought a V1 and tried closing the battery compartment as suggested by dave, but the power light came on then went off again and it wouldn’t work at all. I returned the unit and have just got a replacement, so I hope I have better luck this time.
Well it was still very tricky to get the battery compartment closed, but it is working and sounds excellent.