|
V1b
On/off
Turns unit on and off.
LED
Red LED light indicates the unit is turned on.
Input plug:
Rotating input plug has 90 degree range of motion,
with preset stops at 0, 30, 60 and 90 degrees.
Enables unit to plug into any guitar jack.
Filter:
Continuously variable EQ control that adjusts high and
mid-range frequencies of the particular amp emulation model
selected.
Volume:
Master volume control slider controls the overall volume
level of line out / headphone out signal.
line out:
Provides a stereo line level signal for headphones or
various recording and pre-amp applications.
line in:
Accepts stereo line level input from
an external source. Allows you to play along
and simultaneously monitor both sounds. Volume
control on the V1b does not affect the volume level of
the external source.
active/passive:
Button selects between two (2) pre-amp settings.
Position 1 is setup to work best with passive pickups
and is indicated with red
LED. Position 2 is optimized for Active pickups
and is indicated with green
LED.
big 1-2:
Two (2) setting with driving power and extended
frequency response that summons the depths for detuned
big-bass tone. Guitar players shouldn't have a
Triple Wreck exclusive. Allows bass sound to cut
through the thickest mix.
tite 1-2:
Two (2) highly articulated settings with percussive
attack for the finger style player. More power to
the P, bigger jump to the J. Smooth and accurate
response that allows the notes to be heard AND felt at
the same time.
Headphones:
Acoustically matched light weight stereo headphones with
1.0oz magnets and super bass 40mm diameter drivers.
Cable Kit:
1/8" to 1/8" stereo mini plug cable 6' long, a 1/8"
stereo headphone splitter, a 1/8" to 1/4" stereo
adapter plug and a mono 1/4" to 1/4" female adapter tube.
|
