|
V1
On/off
Turns unit on and off.
LED
LED light indicates the unit is working.
Clean:
Button selects between two (2) distinct clean tube
amp tones. Each tone has a natural, not overly
compressed sound, rich in harmonic content and
dynamic range.
Distort:
Button selects between two (2) distinct tube style
distortion tones. Position one has a blue-like
crunch. Position two has the classic
highly compressed overdriven metal sound.
Each tone is natural, with rich harmonic content,
wide dynamic range, and gobs of sustain.
Dbl/Chs:
Button allows user to select either 25ms Doubling
delay or a huge analog Stereo Chorusing.
Filter:
Continuously variable EQ control that adjusts high and
mid-range frequencies of the particular amp emulation model
selected.
Volume:
Master volume control slider controls the overall volume
level of line out / headphone out signal.
line out:
Provides a stereo line level signal for headphones or
various recording and pre-amp applications.
line in:
Accepts stereo line level input from MP3 player or any
other external source. Allows you to play along
and simultaneously monitor both sounds. Volume
control on the V1 does not affect the volume level of
the external source.
Input plug:
Rotating input plug has 90 degree range of motion,
with preset stops at 0, 30, 60 and 90 degrees.
Enables unit to plug into any guitar jack.
Headphones:
Acoustically matched light weight stereo headphones with
1.0oz magnets and super bass 40mm diameter drivers.
Cable Kit:
1/8" to 1/8" stereo mini plug cable 6' long, a 1/8"
stereo headphone splitter, a 1/8" to 1/4" stereo
adapter plug and a mono 1/4" to 1/4" female adapter tube.
|
